Illustration Image

Cassandra.Link

The best knowledge base on Apache Cassandra®

Helping platform leaders, architects, engineers, and operators build scalable real time data platforms.

3/22/2019

Reading time:8 min

instaclustr/cassandra-lucene-index

by John Doe

Stratio’s Cassandra Lucene Index, derived from Stratio Cassandra, isa plugin for Apache Cassandra that extends its index functionality to provide nearreal time search such as ElasticSearch or Solr, including full text searchcapabilities and free multivariable, geospatial and bitemporal search. It is achieved through an Apache Lucenebased implementation of Cassandra secondary indexes, where each node of the cluster indexes its own data. Stratio’sCassandra indexes are one of the core modules on which Stratio’s BigData platform is based.Index relevance searches allow you to retrieve then more relevant results satisfying a search. The coordinator node sends the search to each node in the cluster, each nodereturns its n best results and then the coordinator combines these partial results and gives you the n best of them,avoiding full scan. You can also base the sorting in a combination of fields.Any cell in the tables can be indexed, including those in the primary key as well as collections. Wide rows are alsosupported. You can scan token/key ranges, apply additional CQL3 clauses and page on the filtered results.Index filtered searches are a powerful help when analyzing the data stored in Cassandra with MapReduceframeworks as Apache Hadoop or, even better, Apache Spark.Adding Lucene filters in the jobs input can dramatically reduce the amount of data to be processed, avoiding full scan.The following benchmark result can give you an idea about the expected performance when combining Lucene indexes withSpark. We do successive queries requesting from the 1% to 100% of the stored data. We can see a high performance for theindex for the queries requesting strongly filtered data. However, the performance decays in less restrictive queries.As the number of records returned by the query increases, we reach a point where the index becomes slower than the fullscan. So, the decision to use indexes in your Spark jobs depends on the query selectivity. The trade-off between bothapproaches depends on the particular use case. Generally, combining Lucene indexes with Spark is recommended for jobsretrieving no more than the 25% of the stored data.This project is not intended to replace Apache Cassandra denormalized tables, inverted indexes, and/or secondaryindexes. It is just a tool to perform some kind of queries which are really hard to be addressed using Apache Cassandraout of the box features, filling the gap between real-time and analytics.More detailed information is available at Stratio’s Cassandra Lucene Index documentation.FeaturesLucene search technology integration into Cassandra provides:Stratio’s Cassandra Lucene Index and its integration with Lucene search technology provides:Full text search (language-aware analysis, wildcard, fuzzy, regexp)Boolean search (and, or, not)Sorting by relevance, column value, and distanceGeospatial indexing (points, lines, polygons and their multiparts)Geospatial transformations (bounding box, buffer, centroid, convex hull, union, difference, intersection)Geospatial operations (intersects, contains, is within)Bitemporal search (valid and transaction time durations)CQL complex types (list, set, map, tuple and UDT)CQL user defined functions (UDF)CQL paging, even with sorted searchesColumns with TTLThird-party CQL-based drivers compatibilitySpark and Hadoop compatibilityNot yet supported:Thrift APILegacy compact storage optionIndexing counter columnsIndexing static columnsOther partitioners than Murmur3Per partition limitRequirementsCassandra (identified by the three first numbers of the plugin version)Java >= 1.8 (OpenJDK and Sun have been tested)Maven >= 3.0Build and installStratio’s Cassandra Lucene Index is distributed as a plugin for Apache Cassandra. Thus, you just need to build a JARcontaining the plugin and add it to the Cassandra’s classpath:Clone the project: git clone http://github.com/Stratio/cassandra-lucene-indexChange to the downloaded directory: cd cassandra-lucene-indexCheckout a plugin version suitable for your Apache Cassandra version: git checkout A.B.C.XBuild the plugin with Maven: mvn clean packageCopy the generated JAR to the lib folder of your compatible Cassandra installation:cp plugin/target/cassandra-lucene-index-plugin-*.jar <CASSANDRA_HOME>/lib/Start/restart Cassandra as usual.Specific Cassandra Lucene index versions are targeted to specific Apache Cassandra versions. So, cassandra-lucene-indexA.B.C.X is aimed to be used with Apache Cassandra A.B.C, e.g.cassandra-lucene-index:3.0.7.1 forcassandra:3.0.7. Please note that production-readyreleases are version tags (e.g. 3.0.6.3), don't use branch-X nor master branches in production.Alternatively, patching can also be done with this Maven profile, specifying the path of your Cassandra installation,this task also deletes previous plugin's JAR versions in CASSANDRA_HOME/lib/ directory:mvn clean package -Ppatch -Dcassandra_home=<CASSANDRA_HOME>If you don’t have an installed version of Cassandra, there is also an alternative profile to let Maven download andpatch the proper version of Apache Cassandra:mvn clean package -Pdownload_and_patch -Dcassandra_home=<CASSANDRA_HOME>Now you can run Cassandra and do some tests using the Cassandra Query Language:<CASSANDRA_HOME>/bin/cassandra -f<CASSANDRA_HOME>/bin/cqlshThe Lucene’s index files will be stored in the same directories where the Cassandra’s will be. The default datadirectory is /var/lib/cassandra/data, and each index is placed next to the SSTables of its indexed column family.For more details about Apache Cassandra please see its documentation.ExamplesWe will create the following table to store tweets:CREATE KEYSPACE demoWITH REPLICATION = {'class': 'SimpleStrategy', 'replication_factor': 1};USE demo;CREATE TABLE tweets ( id INT PRIMARY KEY, user TEXT, body TEXT, time TIMESTAMP, latitude FLOAT, longitude FLOAT);Now you can create a custom Lucene index on it with the following statement:CREATE CUSTOM INDEX tweets_index ON tweets ()USING 'com.stratio.cassandra.lucene.Index'WITH OPTIONS = { 'refresh_seconds': '1', 'schema': '{ fields: { id: {type: "integer"}, user: {type: "string"}, body: {type: "text", analyzer: "english"}, time: {type: "date", pattern: "yyyy/MM/dd"}, place: {type: "geo_point", latitude: "latitude", longitude: "longitude"} } }'};This will index all the columns in the table with the specified types, and it will be refreshed once per second.Alternatively, you can explicitly refresh all the index shards with an empty search with consistency ALL:CONSISTENCY ALLSELECT * FROM tweets WHERE expr(tweets_index, '{refresh:true}');CONSISTENCY QUORUMNow, to search for tweets within a certain date range:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}}');The same search can be performed forcing an explicit refresh of the involved index shards:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, refresh: true}') limit 100;Now, to search the top 100 more relevant tweets where body field contains the phrase “big data gives organizations”within the aforementioned date range:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}}') LIMIT 100;To refine the search to get only the tweets written by users whose names start with "a":SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: [ {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, {type: "prefix", field: "user", value: "a"} ], query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}}') LIMIT 100;To get the 100 more recent filtered results you can use the sort option:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: [ {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, {type: "prefix", field: "user", value: "a"} ], query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}, sort: {field: "time", reverse: true}}') limit 100;The previous search can be restricted to tweets created close to a geographical position:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: [ {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, {type: "prefix", field: "user", value: "a"}, {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"} ], query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}, sort: {field: "time", reverse: true}}') limit 100;It is also possible to sort the results by distance to a geographical position:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: [ {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, {type: "prefix", field: "user", value: "a"}, {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"} ], query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}, sort: [ {field: "time", reverse: true}, {field: "place", type: "geo_distance", latitude: 40.3930, longitude: -3.7328} ]}') limit 100;Last but not least, you can route any search to a certain token range or partition, in such a way that only asubset of the cluster nodes will be hit, saving precious resources:SELECT * FROM tweets WHERE expr(tweets_index, '{ filter: [ {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}, {type: "prefix", field: "user", value: "a"}, {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"} ], query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}, sort: [ {field: "time", reverse: true}, {field: "place", type: "geo_distance", latitude: 40.3930, longitude: -3.7328} ]}') AND TOKEN(id) >= TOKEN(0) AND TOKEN(id) < TOKEN(10000000) limit 100;This last is the basis for Hadoop, Spark and other MapReduce frameworks support.Please, refer to the comprehensive Stratio’s Cassandra Lucene Index documentation.Please see Please see https://www.instaclustr.com/support/documentation/announcements/instaclustr-open-source-project-status/ for Instaclustr support status of this project

Illustration Image

Stratio’s Cassandra Lucene Index, derived from Stratio Cassandra, is a plugin for Apache Cassandra that extends its index functionality to provide near real time search such as ElasticSearch or Solr, including full text search capabilities and free multivariable, geospatial and bitemporal search. It is achieved through an Apache Lucene based implementation of Cassandra secondary indexes, where each node of the cluster indexes its own data. Stratio’s Cassandra indexes are one of the core modules on which Stratio’s BigData platform is based.

architecture

Index relevance searches allow you to retrieve the n more relevant results satisfying a search. The coordinator node sends the search to each node in the cluster, each node returns its n best results and then the coordinator combines these partial results and gives you the n best of them, avoiding full scan. You can also base the sorting in a combination of fields.

Any cell in the tables can be indexed, including those in the primary key as well as collections. Wide rows are also supported. You can scan token/key ranges, apply additional CQL3 clauses and page on the filtered results.

Index filtered searches are a powerful help when analyzing the data stored in Cassandra with MapReduce frameworks as Apache Hadoop or, even better, Apache Spark. Adding Lucene filters in the jobs input can dramatically reduce the amount of data to be processed, avoiding full scan.

spark_architecture

The following benchmark result can give you an idea about the expected performance when combining Lucene indexes with Spark. We do successive queries requesting from the 1% to 100% of the stored data. We can see a high performance for the index for the queries requesting strongly filtered data. However, the performance decays in less restrictive queries. As the number of records returned by the query increases, we reach a point where the index becomes slower than the full scan. So, the decision to use indexes in your Spark jobs depends on the query selectivity. The trade-off between both approaches depends on the particular use case. Generally, combining Lucene indexes with Spark is recommended for jobs retrieving no more than the 25% of the stored data.

spark_performance

This project is not intended to replace Apache Cassandra denormalized tables, inverted indexes, and/or secondary indexes. It is just a tool to perform some kind of queries which are really hard to be addressed using Apache Cassandra out of the box features, filling the gap between real-time and analytics.

oltp_olap

More detailed information is available at Stratio’s Cassandra Lucene Index documentation.

Features

Lucene search technology integration into Cassandra provides:

Stratio’s Cassandra Lucene Index and its integration with Lucene search technology provides:

  • Full text search (language-aware analysis, wildcard, fuzzy, regexp)
  • Boolean search (and, or, not)
  • Sorting by relevance, column value, and distance
  • Geospatial indexing (points, lines, polygons and their multiparts)
  • Geospatial transformations (bounding box, buffer, centroid, convex hull, union, difference, intersection)
  • Geospatial operations (intersects, contains, is within)
  • Bitemporal search (valid and transaction time durations)
  • CQL complex types (list, set, map, tuple and UDT)
  • CQL user defined functions (UDF)
  • CQL paging, even with sorted searches
  • Columns with TTL
  • Third-party CQL-based drivers compatibility
  • Spark and Hadoop compatibility

Not yet supported:

  • Thrift API
  • Legacy compact storage option
  • Indexing counter columns
  • Indexing static columns
  • Other partitioners than Murmur3
  • Per partition limit

Requirements

  • Cassandra (identified by the three first numbers of the plugin version)
  • Java >= 1.8 (OpenJDK and Sun have been tested)
  • Maven >= 3.0

Build and install

Stratio’s Cassandra Lucene Index is distributed as a plugin for Apache Cassandra. Thus, you just need to build a JAR containing the plugin and add it to the Cassandra’s classpath:

  • Clone the project: git clone http://github.com/Stratio/cassandra-lucene-index
  • Change to the downloaded directory: cd cassandra-lucene-index
  • Checkout a plugin version suitable for your Apache Cassandra version: git checkout A.B.C.X
  • Build the plugin with Maven: mvn clean package
  • Copy the generated JAR to the lib folder of your compatible Cassandra installation: cp plugin/target/cassandra-lucene-index-plugin-*.jar <CASSANDRA_HOME>/lib/
  • Start/restart Cassandra as usual.

Specific Cassandra Lucene index versions are targeted to specific Apache Cassandra versions. So, cassandra-lucene-index A.B.C.X is aimed to be used with Apache Cassandra A.B.C, e.g. cassandra-lucene-index:3.0.7.1 for cassandra:3.0.7. Please note that production-ready releases are version tags (e.g. 3.0.6.3), don't use branch-X nor master branches in production.

Alternatively, patching can also be done with this Maven profile, specifying the path of your Cassandra installation, this task also deletes previous plugin's JAR versions in CASSANDRA_HOME/lib/ directory:

mvn clean package -Ppatch -Dcassandra_home=<CASSANDRA_HOME>

If you don’t have an installed version of Cassandra, there is also an alternative profile to let Maven download and patch the proper version of Apache Cassandra:

mvn clean package -Pdownload_and_patch -Dcassandra_home=<CASSANDRA_HOME>

Now you can run Cassandra and do some tests using the Cassandra Query Language:

<CASSANDRA_HOME>/bin/cassandra -f
<CASSANDRA_HOME>/bin/cqlsh

The Lucene’s index files will be stored in the same directories where the Cassandra’s will be. The default data directory is /var/lib/cassandra/data, and each index is placed next to the SSTables of its indexed column family.

For more details about Apache Cassandra please see its documentation.

Examples

We will create the following table to store tweets:

CREATE KEYSPACE demo
WITH REPLICATION = {'class': 'SimpleStrategy', 'replication_factor': 1};
USE demo;
CREATE TABLE tweets (
   id INT PRIMARY KEY,
   user TEXT,
   body TEXT,
   time TIMESTAMP,
   latitude FLOAT,
   longitude FLOAT
);

Now you can create a custom Lucene index on it with the following statement:

CREATE CUSTOM INDEX tweets_index ON tweets ()
USING 'com.stratio.cassandra.lucene.Index'
WITH OPTIONS = {
   'refresh_seconds': '1',
   'schema': '{
      fields: {
         id: {type: "integer"},
         user: {type: "string"},
         body: {type: "text", analyzer: "english"},
         time: {type: "date", pattern: "yyyy/MM/dd"},
         place: {type: "geo_point", latitude: "latitude", longitude: "longitude"}
      }
   }'
};

This will index all the columns in the table with the specified types, and it will be refreshed once per second. Alternatively, you can explicitly refresh all the index shards with an empty search with consistency ALL:

CONSISTENCY ALL
SELECT * FROM tweets WHERE expr(tweets_index, '{refresh:true}');
CONSISTENCY QUORUM

Now, to search for tweets within a certain date range:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"}
}');

The same search can be performed forcing an explicit refresh of the involved index shards:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
   refresh: true
}') limit 100;

Now, to search the top 100 more relevant tweets where body field contains the phrase “big data gives organizations” within the aforementioned date range:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}
}') LIMIT 100;

To refine the search to get only the tweets written by users whose names start with "a":

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: [
      {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
      {type: "prefix", field: "user", value: "a"}
   ],
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1}
}') LIMIT 100;

To get the 100 more recent filtered results you can use the sort option:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: [
      {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
      {type: "prefix", field: "user", value: "a"}
   ],
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1},
   sort: {field: "time", reverse: true}
}') limit 100;

The previous search can be restricted to tweets created close to a geographical position:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: [
      {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
      {type: "prefix", field: "user", value: "a"},
      {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"}
   ],
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1},
   sort: {field: "time", reverse: true}
}') limit 100;

It is also possible to sort the results by distance to a geographical position:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: [
      {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
      {type: "prefix", field: "user", value: "a"},
      {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"}
   ],
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1},
   sort: [
      {field: "time", reverse: true},
      {field: "place", type: "geo_distance", latitude: 40.3930, longitude: -3.7328}
   ]
}') limit 100;

Last but not least, you can route any search to a certain token range or partition, in such a way that only a subset of the cluster nodes will be hit, saving precious resources:

SELECT * FROM tweets WHERE expr(tweets_index, '{
   filter: [
      {type: "range", field: "time", lower: "2014/04/25", upper: "2014/05/01"},
      {type: "prefix", field: "user", value: "a"},
      {type: "geo_distance", field: "place", latitude: 40.3930, longitude: -3.7328, max_distance: "1km"}
   ],
   query: {type: "phrase", field: "body", value: "big data gives organizations", slop: 1},
   sort: [
      {field: "time", reverse: true},
      {field: "place", type: "geo_distance", latitude: 40.3930, longitude: -3.7328}
   ]
}') AND TOKEN(id) >= TOKEN(0) AND TOKEN(id) < TOKEN(10000000) limit 100;

This last is the basis for Hadoop, Spark and other MapReduce frameworks support.

Please, refer to the comprehensive Stratio’s Cassandra Lucene Index documentation.

Please see Please see https://www.instaclustr.com/support/documentation/announcements/instaclustr-open-source-project-status/ for Instaclustr support status of this project

Related Articles

jvm
rest
search

Para - backend for busy developers

John Doe

1/28/2024

lucene
cassandra

Checkout Planet Cassandra

Claim Your Free Planet Cassandra Contributor T-shirt!

Make your contribution and score a FREE Planet Cassandra Contributor T-Shirt! 
We value our incredible Cassandra community, and we want to express our gratitude by sending an exclusive Planet Cassandra Contributor T-Shirt you can wear with pride.

Join Our Newsletter!

Sign up below to receive email updates and see what's going on with our company

Explore Related Topics

AllKafkaSparkScyllaSStableKubernetesApiGithubGraphQl

Explore Further

lucene